Shopping Cart

Trask Turbo Systems

Turbo Systems

Showing all 6 results

Assault Turbo Kits for Touring Models

$6,600.00

$6,600.00 Select options

Assault Turbo Kits for Touring Models

Introducing the TRASK ASSAULT Turbo Kits.

These new TRASK Turbo Kits were originally designed and produced

exclusively for our ASSAULT Series Bikes.

ASSAULT kits were designed to give an aggressive, combative, and

militaristic look and feel to any bike, while providing us with the Monster

Power we desired to build into our ASSAULT series bikes

So now these exclusive kits are available as stand alone kits to be offered

along with all of our other turbo kits.

ASSAULT kits are capable of producing up to three hundred horsepower

and are available for a wide range of Harley-Davidson Bagger models

As always Trask turbo kits are 100% bolt on, and are designed to run on

premium pump gas with 8lbs of boost.

 

This system requires the use of a tuning module (not supplied). 

If you are looking for more we also offer engine upgrades and customs turbo systems so you can reach your desired level of performance.

Note: ALL KITS ARE CUSTOM BUILT ONCE ORDERED, NO COMPLETE KITS ARE KEPT IN  STOCK, ONCE YOU PLACE YOUR ORDER ALLOW FOR A BUILD TIME OF 2 TO 3 WEEKS.

$6,600.00

$6,600.00 Select options

Dyna/Softail Turbo System

$5,490.00

$5,490.00 Select options

Dyna/Softail Turbo System

Trask EFI Dyna & Softail Turbo System Designed For 2005 & Later EFI Dyna / 2001 & Later Softail.

When it comes to Reliability and Performance look no further. With its smooth, predictable, streetable power this turbo system is a much needed add on for any Harley rider.

Whether it be cruising up and down the Boulevard, coast to coast trips or canyon runs, this will put another level of fun to your ride.

This system is designed as a bolt on for the stock Harley Davidson engine.

No for any  engine modifications.

This system makes peak HP and TQ right where you need it, between 3,000 and 4,000 RPM’s. This system is a 100% complete bolt on and runs on premium pump gas.

The system includes: Stainless steel head pipe w/heat shields, tail pipe with billet tip and heat shield, modified Garrett GT Series turbo w/8lb actuator, patent pending billet plenum w/ snap in velocity stack for in interrupted air flow, billet breathers, Trask intercooler w/billet top cap, billet boost gauge kit, a complete hardware kit (which includes a performance Barrnett clutch spring, high flow injectors and NGK spark plugs), step by step instruction packet.

This system requires the use of a tuning module (not supplied).

Note: ALL KITS ARE CUSTOM BUILT, PER ORDER!   PLEASE ALLOW FOR A BUILD TIME OF 2 TO 3 WEEKS

$5,490.00

$5,490.00 Select options

Fury Turbo Kits for Touring Models

$5,490.00

$5,490.00 Select options

Fury Turbo Kits for Touring Models

 

Introducing the TRASK FURY Turbo Kits.

These new TRASK Turbo Kits offer a new level of style, and performance
for the Harley-Davidson motorcycle owner.

When it comes to V-Twin turbo systems Trask is hands down the industry
leader.

These new TRASK FURY Turbo Kits have been designed to offer an even
broader range of smooth, reliable, efficient and streetable horsepower and
performance.

The new FURY kits are capable of producing between 120HP-300HP
More than enough to get your adrenalin pumping.

As always Trask turbo kits are 100% bolt on, and are designed to run on
premium pump gas with 8lbs of boost.

This systems makes peak HP and TQ right where you need it, between 3,000 and 4,000 RPM’s. This system is a 100% complete bolt on and runs on premium pump gas. The system includes: stainless steel head pipe w/steel heat shields, Steel Tail Pipe w/heat shield, side dump pipe or single muffler assembly w/ billet tip (right side only – dual kits available option), Modified Garrett GT Series turbo w/8lb actuator, patent pending billet plenum w/ snap in Velocity stack for in interrupted air flow, Billet breathers, Trask Intercooler w/billet top cap, Billet boost gauge kit, a complete hardware kit (which includes a performance Barrnett clutch spring, high flow injectors and NGK Spark Plugs), step by step instruction packet.

This system requires the use of a tuning module (not supplied).

If you are looking for more we also offer engine upgrades and customs turbo systems so you can reach your desired level of performance.

Note: ALL KITS ARE CUSTOM BUILT ONCE ORDERED, NO COMPLETE KITS ARE KEPT IN  STOCK, ONCE YOU PLACE YOUR ORDER ALLOW FOR A BUILD TIME OF 2 TO 3 WEEKS.

$5,490.00

$5,490.00 Select options

Trask Sportster Turbo System 07′ – 14′

$4,995.00

$4,995.00 Select options

Trask Sportster Turbo System 07′ – 14′

Designed For 07 & Later EFI Sportster 883’s – 1200’s.

When it comes to reliability and performance look no further. With its smooth, predictable, streetable power this turbo system is a much needed add on for any Harley rider.

Whether it be cruising up and down the boulevard, coast to coast trips or canyon runs, this will put another level of fun to your ride.

This system is designed as a bolt on for the stock Harley Davidson engine.

No need any engine modifications.

This systems makes peak HP and TQ right where you need it, between 3,000 and 4,000 RPM’s.

This system is a 100% complete bolt on and runs on premium pump gas.

The system provides smooth streetable performance.

This system includes: stainless steel head pipe w/heat shields, steel tail pipe and heat shields, modified Garrett GT Series turbo w/8lb actuator, Trask plenum assembly with billet B.O.V., high flow air filter, billet boost gauge kit, a complete hardware kit, step by step instruction packet and mapping CD.

Offered in the following finishes:black on black, chrome & polished and black and chrome.

This system requires the use of a tuning module (not supplied).

Note: ALL KITS ARE CUSTOM BUILT, PER ORDER!   PLEASE ALLOW FOR A BUILD TIME OF 2 TO 3 WEEKS

$4,995.00

$4,995.00 Select options

Trask V-Rod Turbo System 02 -14

$5,490.00

$5,490.00 Select options

Trask V-Rod Turbo System 02 -14

Designed for 2002′ – 2014′ Harley Davidson V-Rod’s. (The V-Rod Muscle is it’s own turbo system, This standard V-Rod system will not fit the V-Rod Muscle)

This popular turbo system comes complete with all necessary components needed to turn your stock or mildly modified V-Rod into a TRASK Power House.

Your turbo V- Rod will produce between 160 – 165 HP and 100 – 105 TQ at the rear wheel. The system provides smooth, reliable, streetable performance.

This system includes: stainless steel head pipe w/heat shields, steel tail pipe and heat shield, Modified Garrett GT Series ball bearing turbo w/8lb actuator, Trask high flow intercooler with guard, Trask plenum assembly with billet B.O.V., high flow air filter, billet boost gauge kit, a complete hardware kit, step by step instruction packet install DVD and map CD.

Offered in black on black, chrome & polished and black and chrome.

This system requires the use of a tuning module (not supplied).

Note: ALL KITS ARE CUSTOM BUILT, PER ORDER!   PLEASE ALLOW FOR A BUILD TIME OF 2 TO 3 WEEKS

$5,490.00

$5,490.00 Select options

Typhoon Turbo Kit For Touring Models

$6,800.00

$6,800.00 Select options

Typhoon Turbo Kit For Touring Models

Introducing the TRASK TYPHOON Turbo Kits.

These new TRASK Turbo Kits offer a new hardcore and exacting look that

is sure to make a statement on any bike that has it installed.

With its two separate and tandem exhaust pipes that sweep side by side,

along the motor, cumulating to the dual billet exhaust tips, this Trask turbo

kit provides an unique and assured look.

The new TRASK TYPHOON Turbo Kit was designed to provide an

assured, yet elegant statement that would complement any bike that it was

bolted on.

TRASK TYPHOON kits are all business up front, that provides broad,

smooth, reliable, efficient, horsepower in back, ranging anywhere from

120HP to 300HP.

As always Trask turbo kits are 100% bolt on, and are designed to run on

premium pump gas with 8lbs of boost.

 

This system requires the use of a tuning module (not supplied). 

If you are looking for more we also offer engine upgrades and customs turbo systems so you can reach your desired level of performance.

Note: ALL KITS ARE CUSTOM BUILT ONCE ORDERED, NO COMPLETE KITS ARE KEPT IN  STOCK, ONCE YOU PLACE YOUR ORDER ALLOW FOR A BUILD TIME OF 2 TO 3 WEEKS.

$6,800.00

$6,800.00 Select options

About Us

Lorem ipsum dolor sit amet, consectetur adipisicing elitse do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercita tio ullamco laboris nisi ut aliquip ex ea commodo.

Newsletter

WORLDWIDE SHIPPING

Free Shipping On Order Over $100

ORDER ONLINE SERVICE

Call Us Now: (123) 456 789