Welcome to Trask Performance

Cart

Trask Drive Line Parts

Drive Line Parts

Showing all 11 results

12mm O2 Bung Caps

$3.99

12mm O2 Bung Caps

These 12mm stainless steel plugs allow you to cap off the existing bungs

$3.99

18mm 02 Bung Caps

$4.99

18mm 02 Bung Caps

These 18mm and 12mm stainless steal plugs allow you to cap off the existing bungs in your head pipe.

$4.99

AIM Variable Clutch Assist

$299.95

AIM Variable Clutch Assist

For the big power build that requires a heavy duty clutch spring, the AIM variable clutch assist helps lighten the load on your hand.
Not only lighter, but stronger clutch engagement than stock when it revs up, offers 40% reduced effort, better clutch disengagement, and easier to find neutral.
88”-UP TRASK P/N: TM-3013
103”-UP TRASK P/N: TM-3012
124”-UP TRASK P/N: TM-3011
$299.95

Cush to Chain Replacement Sprockets

$178.95

Cush to Chain Replacement Sprockets

52 Tooth Cush drive replacement Sprocket

Designed to fit Trask Cush Drive as a replacement sprocket. Proudly made in the USA
at our Phoenix, AZ facility.
-Fits 2009-2019 H-D Touring models with cush-drive
-Fits factory wheel
-Sprocket ratios are stock gearing
Trask P/N TM-2901-4 $178.95

54 Tooth Cush drive replacement Sprocket

Designed to fit Trask Cush Drive as a replacement sprocket. Proudly made in the USA
at our Phoenix, AZ facility.
-Fits 2009-2019 H-D Touring models with cush-drive
-Fits factory wheel
-Sprocket ratios are slightly lower gearing and more torque than stock (well raise your
engine approximately 300 rpm at road speed) (25 TOOTH FRONT SPROCKET)
Trask P/N TM-2901-3 $178.95
$178.95

Hydraulic Side Cover

$359.95

Hydraulic Side Cover

Designed for all six speed Harley-Davidson models, this billet cover is used to switch to a hydraulic clutch system or to give a custom look to your existing hydraulic setup. Proudly made in the USA at our Phoenix, AZ facility.

-Fits H-D 2006-Later Models with factory 6-Speed transmissions

-Comes with heavy duty bearing kit

-Available in black or chrome finishes

drag-logo DRAG PART NUMBERS (1107-0406 Black) (1107-0407 Chrome)
$359.95

M8 Billet Clutch Basket

$449.95

$449.95Add to cart

M8 Billet Clutch Basket

●Replace it before your break it
●Can handle engine builds making in excess of 300 horsepower; strongly
recommended for engines producing 100 horsepower or more
●Includes mounting bolts and lock tabs
●Direct bolt-on replacement for the stock clutch basket
●Hard-anodized finish for added durability
●Made in the U.S.A
FITS 2017-2018 TOURING MODELS & 2018 SOFTAIL MODELS.
TRASK P/N: TM-2017   DRAG P/N: 1132-1220
Retail: $449.95
$449.95

$449.95Add to cart

Mystfree Twin-Cam Breather Kit

$229.95

Mystfree Twin-Cam Breather Kit

Tired of cleaning oil off of you and your bike? We have the solution, machined from T-6061 billet aluminum, our Mystfree Breather Kit completely eliminates oil blowby emitted from the engine’s breather system, and allows oil to drain properly into the rockers. Fits any stock Twin-cam 88-110 cubic inches, in good mechanical condition. Proudly made in the USA at our Phoenix, AZ facility.

Drag Part Number 0920-0118
$229.95

O2 Sensor Bung Kits and Caps

$4.99

O2 Sensor Bung Kits and Caps

Deleting your O2 sensors? Or need to update the the size of your bungs? We got you covered. Don’t be limited on what pipes you can and can’t run, these allow you to run the stock o2 sensors on later Delphi bikes. Also for use of aftermarket tuning systems that utilize an auto-tune feature. Offering 12mm Bungs, 45 degree 18mm Bungs, and stainless steel caps for both 12 and 18mm fitments.
$4.99

Trask Cush Drive Chain Conversion Kit

$699.95

Trask Cush Drive Chain Conversion Kit

52 Tooth Conversion Kit

Designed to upgrade the stock belt drive to chain drive for the rider that demands big
power. The custom steel 52-tooth rear sprocket and Trask custom billet aluminum
carrier are easy to install.
-Heat treated and coated for long lasting wear.
-Comes with high quality bearings and spacers.
-Proudly made in the USA at our Phoenix, AZ facility.
-Fits 2009-2019 H-D Touring models with cush-drive
-Fits factory wheel
-Sprocket ratios are comparable to stock (25 TOOTH FRONT SPROCKET)
-Minimum 130 link 530 chain are required to be purchased separately to complete
install.
-High quality O-Ring chain recommended.
TRASK P/N: TM-2902   DRAG P/N: 1210-2424
Retail $699.95

 

54 Tooth Coversion Kit

Designed to upgrade the stock belt drive to chain drive for the rider that demands big
power. The custom steel 54-tooth rear sprocket and Trask custom billet aluminum
carrier are easy to install.
-Heat treated and coated for long lasting wear.
-Comes with high quality bearings and spacers.
-Proudly made in the USA at our Phoenix, AZ facility.
-Fits 2009-2019 H-D Touring models with cush-drive
-Fits factory wheel
-Sprocket ratios are slightly lower gearing and more torque than stock (well raise your engine approximately 300rpm at road speed) (25 TOOTH FRONT SPROCKET)
-Minimum 130 link 530 chain are required to be purchased separately to complete install.
-High quality O-ring chain recommended.
TRASK P/N: TM-2901   DRAG P/N: 1210-1851
Retail $699.95
$699.95

Twin-Cam Billet Clutch Basket

$449.95

$449.95Read more

Twin-Cam Billet Clutch Basket

Introducing a solution to one of the biggest weak spots when it comes to making Big Power. We designed this basket to handle the monster power our high output turbo systems that can produce over 300 HP, but we strongly recommend that it be used on all Twin-Cams producing 100 HP or more. Proudly made in the USA at our Phoenix, AZ facility.

-Available for 2007-2016 H-D Twin-Cam Engines

-Comes in a hard anodized Red for increased durability

Drag Part Number 1132-1005
$449.95

$449.95Read more

V-Rod Billet Oil Pan

$449.95

V-Rod Billet Oil Pan

Precision CNC Machined from solid billet 6061-T6 Aluminum, computer analyzed, and fully tested, this pan is extremely rigid and 4x stronger than the cast OEM oil pan. The pan rail is 5/8” thick and gusseted in all areas eliminating flex and movement in the crankcase area. Proudly made in the USA at our Phoenix, AZ facility.

-Available in Standard OEM Capacity or +1 quart over stock (additional $100).

-Must purchase extended length billet dipstick separately when purchasing +1 over quart of stock oil pan

Standard Capacity
Polished 1105-0103
Black 1105-0102

 

$449.95