2 Bar Map Sensor
The 2 bar measures boost pressure, signals the ECM to add fuel, and retard timing. Designed to work with auto tune function ECM’s (Zippers Thundermax or Power Commander 5). This 2 bar MAP sensor comes with a wiring harness installed, boost feed line and a ¼-28 brass fitting. This is required when using the Zippers Thundermax with a Trask Turbo System.
This is not your typical air cleaner. With its clear plexiglass cover, and hidden integrated breather system, this Hi-flow air cleaner was designed to give a clean, simple, & aggressive look, made to stand out in a crowd. Introducing a new Nick Trask innovation, every Assault Charge Hi-flow air cleaner comes with the new Trask snap in velocity stack. This simple interchangeable snap in velocity stack can be changed quickly and easily to accommodate different sized throttle bodies. Clean and easy to maintain with a rechargeable filter element as well as dyno tested in house producing 8-10 horsepower gains over the stock OEM air cleaner. Proudly made in the USA at our Phoenix, AZ facility.
-Available in Chrome, Black, Reverse Cut and Raw finishes
-Fits H-D M8 Touring Models, Twin Cam EFI Throttle by Wire, & Twin Cam EFI/Carburetor Throttle by Cable
|Twin Cam||Throttle By Wire|
|Twin Cam||EFI Cable|
Low compression pistons are ideal for forced induction applications running higher boost pressures over 8psi on the revolution motor. Our forged pistons are designed specifically for forced induction, providing optimal reliable performance. Standard bore for 1130cc V-Rod engines. Proudly made in the USA at our Phoenix, AZ facility.
Re-chargeable filters for your V-Rod. These high flow filters are designed and made exclusively for our turbo systems. You can use any recharger kit on the market for these filters. Pre-Filter (rainsock) available to protect your filter from rain and road debris.
Our high flow injectors come in every Trask Turbo Kit and will support 250+ horsepower motors. If you are looking for high flow injectors for your big motor build, look no further. Designed to run 8.69 GPS and 30 degree spray pattern for better atomization, these injectors are an excellent addition to any big motor build. (V-Rod owners be aware you will need to run our billet fuel rail with these injectors).