Assault Series 2-1 Exhaust
Designed from the ground up to look good, sound good, and live up to the Trask Performance reputation for high quality performance products. This dyno tested exhaust system is made from the highest quality 16 gauge stainless steel materials, mandrel bent, and then tig welded and gusseted for strength. Complete with custom heat shields including safety wired fasteners for a race inspired look. With potential gains from 8-10 horsepower on a stock H-D V-Twin, we are confident you will enjoy the smooth and consistent power band increase this exhaust will provide you. Proudly researched, developed, and manufactured in the USA at our Phoenix, AZ facility.
-Available for H-D Twin Cam Dyna & Touring, M8 Touring models, and Evo FXR models
-Dyna and FXR fitments work with Mid or Forward Controls
-Suited for stock outputs up to 120 horsepower outputs
|FL 07-16 Twin Cam Straight Back||1800-2204|
|FL 07-16 Twin Cam Kick-out||1800-2205|
|FL 17-Later M8 Straight Back||1800-2206|
|FL 17-Later M8 Kick-out||1800-2207|
|Dimensions||30 x 20 x 10 in|
The Trask bolt on Assault Armor front frame protectors are just what any FXR or FXD owner needs to keep their frame from getting marred up from road debris and provide a modern and clean industrial look. Made from 6061 aluminum plate, black powder coated, & laser etched to provide a long lasting and durable finish. Proudly made in the USA at our Phoenix, AZ facility.
-Available for 1984-1999 FXR’s and 1991-2017 FXD’s
-Easy installation and comes with all necessary hardware and instructions.
Providing improved all around performance throughout the entire power-band, the new 2-1 Hot Rod exhaust system offers an updated sleek new styling look, and aggressive new sound for your Victory Motorcycle. Our exhaust is made from high quality seamless steel pipe, mandrel bent, with O2 bungs built in along with full heat shield coverage. Dyno developed tested, the 2-1 Hot Rod exhaust system produced just over 92 horsepower, and 112 foot pounds of torque on our 106 cubic inch Victory V-Twin test bike. Proudly made in the USA at our Phoenix, AZ facility.
Dyno developed and tested these Trask slip-ons will provide you with some added power and sound without breaking the bank, all while maintaining the classic vintage look. Our slip-ons are made from high quality steel pipe. Proudly made in the USA at our Phoenix, AZ facility.
-Available for all Indian Scout models
-Available in Chrome or Black finish
This is not your typical air cleaner. With its clear plexiglass cover, and hidden integrated breather system, this Hi-flow air cleaner was designed to give a clean, simple, & aggressive look, made to stand out in a crowd. Introducing a new Nick Trask innovation, every Assault Charge Hi-flow air cleaner comes with the new Trask snap in velocity stack. This simple interchangeable snap in velocity stack can be changed quickly and easily to accommodate different sized throttle bodies. Clean and easy to maintain with a rechargeable filter element as well as dyno tested in house producing 8-10 horsepower gains over the stock OEM air cleaner. Proudly made in the USA at our Phoenix, AZ facility.
-Available in Chrome, Black, Reverse Cut and Raw finishes
-Fits H-D M8 Touring Models, Twin Cam EFI Throttle by Wire, & Twin Cam EFI/Carburetor Throttle by Cable
|Twin Cam||Throttle By Wire|
|Twin Cam||EFI Cable|
The Trask Indian Scout 2-1 provides an all around performance gain throughout the entire power-band and brings classic vintage styling to your Indian Scout. Our exhaust system is made from high quality seamless steel pipe, that is mandrel bent. Every exhaust has O2 bungs built in, along with full heat shield coverage. Dyno developed and tested, this 2-1 Trask exhaust produced just under 98 horsepower and 74 ft/lbs torque on our stock test bike with our high flow Trask air cleaner.
-Available in Black on Black, Chrome, and Black/Chrome combination finish
Derived using the same style and look from the Trask Assault Series custom bikes, these risers will provide a whole new dynamic to both the look and feel of your V-Twin Motorcycle. Beautifully crafted out of the highest quality billet aluminum and complete with 12pt stainless steel top clamp bolts to complete the look. Proudly made in the USA.
-Available in Chrome, Raw or Reverse Cut finishes
-Available in 2 inch, 4 inch, 6 inch and 8 inch heights, as well as fitments for 1” and 1.25” diameter bars