SpeedGlide Complete RearEnd Kit
Designed for our custom bikes, this rear-end kit is standard on our Assault and SpeedGlide builds. The Trask SpeedGlide bags are made out of the highest quality composite materials and built to last. We are confident our kit will provide any 2009-Later Touring Harley-Davidson with a truly unique and custom built look.
This kit comes complete with the SpeedGlide rear fender , both left and right saddlebags, side covers, trim, and all mounting hardware and instructions.
Bags do not come with Number Plate Pictured, license plate frame or custom lighting, and uses your factory bag lids
-Please Select your bike year when ordering
|Dimensions||40 x 40 x 14 in|
Introducing the TRASK FURY Turbo Kits.
These new TRASK Turbo Kits offer a new level of style, and performance
for the Harley-Davidson motorcycle owner.
When it comes to V-Twin turbo systems Trask is hands down the industry
These new TRASK FURY Turbo Kits have been designed to offer an even
broader range of smooth, reliable, efficient and streetable horsepower and
The new FURY kits are capable of producing between 120HP-300HP
More than enough to get your adrenalin pumping.
(depends on engine size, fuel quality, and standard or hi-output kit)
- Standard Fury Kit GT22 Turbo up to 200HP
- Hi-Output Fury Kit GT28 Turbo up to 300HP
As always Trask turbo kits are 100% bolt on, and are designed to run on
premium pump gas with 8lbs of boost.
This systems makes peak HP and TQ right where you need it, between 3,000 and 4,000 RPM’s. This system is a 100% complete bolt on and runs on premium pump gas. The system includes: stainless steel head pipe w/steel heat shields, Steel Tail Pipe w/heat shield, side dump pipe or single muffler assembly w/ billet tip (right side only – dual kits available option), Modified Garrett GT Series turbo w/8lb actuator, patent pending billet plenum w/ snap in Velocity stack for in interrupted air flow, Billet breathers, Trask Intercooler w/billet top cap, Billet boost gauge kit, a complete hardware kit (which includes a performance Barrnett clutch spring, high flow injectors and NGK Spark Plugs), step by step instruction packet.
This system requires the use of a tuning module (not supplied).
If you are looking for more we also offer engine upgrades and customs turbo systems so you can reach your desired level of performance.
Note: ALL KITS ARE CUSTOM BUILT ONCE ORDERED, NO COMPLETE KITS ARE KEPT IN STOCK, ONCE YOUR ORDER IS PLACE YOUR ESTIMATED SHIP DATE WILL BE PROVIDED .
This grille guard provides a custom race inspired look to the front of your Harley-Davidson Road Glide. Proudly made in the USA at our Phoenix, AZ facility
-Available in Black powder coated finish
-Available for dual and mono style Road Glide headlights
-Includes all necessary hardware to mount to your motorcycle
Originally developed for in-house use with our Trask custom builds, our hidden fairing bracket is designed to give your bike a clean custom look by eliminating the stock crash bar. Made to be completely bolt on, our bracket easily mounts to the stock locations of the Road Glide fairing. It is non obtrusive and will not interfere with the innards of the fairing. Proudly made in the USA at our Phoenix, AZ facility.
-Comes with amp mount and works with raked and non raked bikes
-Made from mild steel and available in a black powder-coated finish
-Fits 98-13 FLTR Models
Usually the inside of the saddle bag is the least noticed of any bike. Add a little touch of style to your saddlebags with our Trask tether straps. Made of high quality material, and embroidered stitching.
-Sold in pairs
-Available for 2013-Earlier and 2014-Later style H-D Saddlebags
-Available in four different colors: Black, Blue, Charcoal, & Red
Like all V-Line products, this Chin Spoiler is designed to give your bike a clean, modern, and sleek look. The perfect addition for any build or upgrade, it comes gel-coated and with all necessary install hardware.
-Available for 2014 – 2016 non raked bikes and fits with stock H-D oil cooler
This is the go to chin spoiler that so many custom builds have taken advantage of,with its clean lines and custom look, this chin spoiler is the perfect complement for any upgrade or build.
-Clearanced for oil coolers, primed and ready to paint
-Comes with all necessary hardware to mount to your bike
-Multiple fitment options for 98-16 H-D Touring models with raked or non-raked frame necks
DRAG PART # DESCRIPTION
|NON-RAKED||(19.5″ × 11″ × 6″)|
|0504-0254||For 14-16 FLHT, FLHX, FLHR|
|0504-0255||For 09-13 FLHT, FLHR, FLTR, FLHX|
|0504-0256||For 98-08 FLT, FLHT, FLHR, FLTR, FLHX|
|RAKED||(19.5″ × 11″ × 11″)|
|0504-0272||For 98-08 FLT, FLHT, FLHR, FLTR, FLHX|
|0504-0257||For 09-13 FLHT, FLHR, FLTR, FLHX|
|0504-0282||For 2014-16 FLT, FLHT, FLHR, FLTR, FLHX|
Trask paint saver washers will provide a clean and custom touch to your bike. Originally created for our custom bike builds, these billet machined custom washers are proudly made in the USA at our Phoenix, AZ facility.
-For use with flat head fasteners
-Available in black or chrome finish
-Sold in 5-packs
DRAG PART NUMBERS (2404-0579 Black) (2404-0580 Chrome)