Assault Charge High Flow Air Cleaner
This is not your typical air cleaner. With its clear plexiglas cover, and hidden integrated breather system, this Hi-flow air cleaner was designed to give a clean, simple, & aggressive look, made to stand out in a crowd. Introducing a new Nick Trask innovation, every Assault Charge Hi-flow air cleaner comes with the new Trask snap in velocity stack. This simple interchangeable snap in velocity stack can be changed quickly and easily to accommodate different sized throttle bodies. Clean and easy to maintain with a rechargeable filter element as well as dyno tested in house producing 8-10 horsepower gains over the stock OEM air cleaner.
- Proudly made in the USA at our Phoenix, AZ facility.
- Available in Chrome, Black, Reverse Cut and Raw finishes
- Fits H-D M8 Touring / Softail Models, Twin Cam EFI Throttle by Wire, & Twin Cam EFI/Carburetor Throttle by Cable
|Twin Cam||Throttle By Wire|
|Twin Cam||EFI Cable|
|M8||Touring / Softail|
|Dimensions||10 × 10 × 6 in|
Designed from the ground up to look good, sound good, and live up to the Trask Performance reputation for high quality performance products. This dyno tested exhaust system is made from the highest quality 16 gauge stainless steel materials, mandrel bent, and then TIG welded and gusseted for strength. Complete with custom heat shields including safety wired fasteners for a race inspired look. With potential gains from 8-10 horsepower on a stock H-D V-Twin, we are confident you will enjoy the smooth and consistent power band increase this exhaust will provide you. Proudly researched, developed, and manufactured in the USA at our Phoenix, AZ facility.
- Available for H-D Twin Cam Dyna & Touring, M8 Touring models, and Evo FXR models.
- Dyna and FXR fitments work with Mid or Forward Controls.
- Does not fit Early FXR models with 4-speed transmissions.
- Straight or Kickout option for Touring Models.
- Proudly made in the U.S.A.
DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES
Qualified Manufacturer Declared Replacement Part for Harley-Davidson Non-CVO, FL Touring Models, Fuel Injected 2007
Qualified Manufacturer Declared Replacement Part for Harley-Davidson, FXD Models, 1991-1994
Qualified Manufacturer Declared Replacement Part for Harley-Davidson, FXD Models, Fuel Injected 2006-2007
Qualified Manufacturer Declared Replacement Part for Harley-Davidson, FXR Models, 1984-1994 and 1999-2000
|FL 07-16 Twin Cam Straight Back||1800-2204|
|FL 07-16 Twin Cam Kick-out||1800-2205|
|FL 17-Later M8 Straight Back||1800-2206|
|FL 17-Later M8 Kick-out||1800-2207|
|FXR 84-94 & 99-00||1800-2210|
Designed for all six speed Harley-Davidson models, this billet cover is used to switch to a hydraulic clutch system or to give a custom look to your existing hydraulic setup. Proudly made in the USA at our Phoenix, AZ facility.
-Fits H-D 2006-Later Models with factory 6-Speed transmissions
-Comes with heavy duty bearing kit
-Available in black or chrome finishes
The Trask Big Power Head Bolt Kit is designed to strengthen up your engine while providing a custom build look to your engine. Made using only the highest quality alloy and chrome plated, these kits are available for both Harley twin cam motors and S&S motors. Proudly made in the USA at our Phoenix, AZ facility.
|S&S (8 Long)||2401-0894|
|H-D (4 Long, 4 Short)||2401-0895|
ThunderMax is an industry award winning, performance ECM designed specifically for EFI equipped Harley Davidson® motorcycles. This highly advanced, stand-alone tuning system utilizes proprietary AutoTune technology with wide-band oxygen sensors to deliver unmatched performance and rideability. ThunderMax comes 100% assembled, ready to install with no wire-cutting or splicing required. Simply replace the factory ECM and oxygen sensors, load a map, and enjoy your new ride!
Trask ARP high strength cylinder stud kit is a must for any high output engine or turbo build. Perfect for use with oversized cases, these 7/16 thread studs are much stronger compared to the OEM 3/8 thread studs that can be pulled out of the case in High Performance engine builds. Proudly made in the USA at our Phoenix, AZ facility.