This is not your typical air cleaner. With its clear plexiglas cover, and hidden integrated breather system, this Hi-flow air cleaner was designed to give a clean, simple, & aggressive look, made to stand out in a crowd. Introducing a new Nick Trask innovation, every Assault Charge Hi-flow air cleaner comes with the new Trask snap in velocity stack. This simple interchangeable snap in velocity stack can be changed quickly and easily to accommodate different sized throttle bodies. Clean and easy to maintain with a rechargeable filter element as well as dyno tested in house producing 8-10 horsepower gains over the stock OEM air cleaner.
- Proudly made in the USA at our Phoenix, AZ facility.
- Available in Chrome, Black, Reverse Cut and Raw finishes
- Fits H-D M8 Touring / Softail Models, Twin Cam EFI Throttle by Wire, & Twin Cam EFI/Carburetor Throttle by Cable
|Twin Cam||Throttle By Wire|
|Twin Cam||EFI Cable|
|M8||Touring / Softail|
Designed from the ground up to look good, sound good, and live up to the Trask Performance reputation for high quality performance products. This dyno tested exhaust system is made from the highest quality 16 gauge stainless steel materials, mandrel bent, and then TIG welded and gusseted for strength. Complete with custom heat shields including safety wired fasteners for a race inspired look. With potential gains from 8-10 horsepower on a stock H-D V-Twin, we are confident you will enjoy the smooth and consistent power band increase this exhaust will provide you. Proudly researched, developed, and manufactured in the USA at our Phoenix, AZ facility.
- Available for H-D Twin Cam Dyna & Touring, M8 Touring models, and Evo FXR models.
- Dyna and FXR fitments work with Mid or Forward Controls.
- Does not fit Early FXR models with 4-speed transmissions.
- Straight or Kickout option for Touring Models.
- Proudly made in the U.S.A.
DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES
Qualified Manufacturer Declared Replacement Part for Harley-Davidson Non-CVO, FL Touring Models, Fuel Injected 2007
Qualified Manufacturer Declared Replacement Part for Harley-Davidson, FXD Models, 1991-1994
Qualified Manufacturer Declared Replacement Part for Harley-Davidson, FXD Models, Fuel Injected 2006-2007
Qualified Manufacturer Declared Replacement Part for Harley-Davidson, FXR Models, 1984-1994 and 1999-2000
|FL 07-16 Twin Cam Straight Back||1800-2204|
|FL 07-16 Twin Cam Kick-out||1800-2205|
|FL 17-Later M8 Straight Back||1800-2206|
|FL 17-Later M8 Kick-out||1800-2207|
|FXR 84-94 & 99-00||1800-2210|
Derived using the same style and look from the Trask Assault Series custom bikes, these risers will provide a whole new dynamic to both the look and feel of your V-Twin Motorcycle. Beautifully crafted out of the highest quality billet aluminum and complete with 12-pt stainless steel top clamp bolts to complete the look.
- Proudly made in the USA.
- Available in Chrome, Raw or Reverse Cut finishes
- Available in 2″ inch, 4″ inch, 6″ inch and 8″ inch heights, as well as fitments for 1” inch and 1.25” inch diameter bars
|1.25″ Clamp||2″ Rise||4″ Rise||6″ Rise||8″ Rise|
|1″ Clamp||2″ Rise||4″ Rise||6″ Rise||8″ Rise|
Introducing the TRASK ASSAULT Turbo Kits.
These new TRASK Turbo Kits were originally designed and produced
exclusively for our ASSAULT Series Bikes.
ASSAULT kits were designed to give an aggressive, combative, and
militaristic look and feel to any bike, while providing us with the Monster
Power we desired to build into our ASSAULT series bikes
So now these exclusive kits are available as stand alone kits to be offered
along with all of our other turbo kits.
ASSAULT kits are capable of producing up to three hundred horsepower
and are available for a wide range of Harley-Davidson Bagger models
(depends on engine size, fuel quality, and standard or hi-output kit)
- Standard Assault Kit GT22 Turbo up to 200HP
- Hi-Output Assault Kit GT28 Turbo up to 300HP
As always Trask turbo kits are 100% bolt on, and are designed to run on
premium pump gas with 8lbs of boost.
All Assault kits include an External Wastegate
This system requires the use of a tuning module (not supplied).
If you are looking for more we also offer engine upgrades and customs turbo systems so you can reach your desired level of performance.
Note: ALL KITS ARE CUSTOM BUILT ONCE ORDERED, NO COMPLETE KITS ARE KEPT IN STOCK, ONCE YOU PLACE YOUR ORDER ETA WILL BE PROVIDED .
The Trask Big Power Head Bolt Kit is designed to strengthen up your engine while providing a custom build look to your engine. Made using only the highest quality alloy and chrome plated, these kits are available for both Harley twin cam motors and S&S motors. Proudly made in the USA at our Phoenix, AZ facility.
|S&S (8 Long)||2401-0894|
|H-D (4 Long, 4 Short)||2401-0895|
Stop messing around with failing and unreliable OEM fuel pressure regulators…
Upgrade to the Trask fuel pressure regulator housing!
- Proudly made in the U.S.A.
- Anodized red.
- Machined from billet aluminum.
Fits 2001-2007 H-D Softails & 2002-2007 H-D Touring models
DRAG P/N (1009-0025 RED)
Fuel rail is machined from T-6061 aluminum and then black anodized for strength. Allows use of short body pico injectors. Accepts multiple size fuel injectors for high performance applications. Harness features OEM style connectors for plug and play installation. Proudly made in the USA at our Phoenix, AZ facility.
-Fits 06-07 Touring, 06-15 FXD/FXDWG, 02-15 FXST/FLST
|Drag Part Number||1022-0125|
The Trask Boost Gauge kit is the perfect addition to any bike with a Trask Turbo Kit Installed. Designed to monitor boost levels, we have these gauges custom made to our specifications and are silicone filled to handle the constant vibration from your V-Twin Turbocharged Engine. Gauge mount is made from billet aluminum for a resilient set-up.
-Kit includes everything for installation
-Available in Black and Chrome Finishes