Introducing the TRASK FURY Turbo Kits.
These new TRASK Turbo Kits offer a new level of style, and performance
for the Harley-Davidson motorcycle owner.
When it comes to V-Twin turbo systems Trask is hands down the industry
These new TRASK FURY Turbo Kits have been designed to offer an even
broader range of smooth, reliable, efficient and streetable horsepower and
The new FURY kits are capable of producing between 120HP-300HP
More than enough to get your adrenalin pumping.
(depends on engine size, fuel quality, and standard or hi-output kit)
- Standard Fury Kit GT22 Turbo up to 200HP
- Hi-Output Fury Kit GT28 Turbo up to 300HP
As always Trask turbo kits are 100% bolt on, and are designed to run on
premium pump gas with 8lbs of boost.
This systems makes peak HP and TQ right where you need it, between 3,000 and 4,000 RPM’s. This system is a 100% complete bolt on and runs on premium pump gas. The system includes: stainless steel head pipe w/steel heat shields, Steel Tail Pipe w/heat shield, side dump pipe or single muffler assembly w/ billet tip (right side only – dual kits available option), Modified Garrett GT Series turbo w/8lb actuator, patent pending billet plenum w/ snap in Velocity stack for in interrupted air flow, Billet breathers, Trask Intercooler w/billet top cap, Billet boost gauge kit, a complete hardware kit (which includes a performance Barrnett clutch spring, high flow injectors and NGK Spark Plugs), step by step instruction packet.
This system requires the use of a tuning module (not supplied).
If you are looking for more we also offer engine upgrades and customs turbo systems so you can reach your desired level of performance.
Note: ALL KITS ARE CUSTOM BUILT ONCE ORDERED, NO COMPLETE KITS ARE KEPT IN STOCK, ONCE YOUR ORDER IS PLACE YOUR ESTIMATED SHIP DATE WILL BE PROVIDED .
This grille guard provides a custom race inspired look to the front of your Harley-Davidson Road Glide. Proudly made in the USA at our Phoenix, AZ facility
-Available in Black powder coated finish
-Available for dual style Road Glide headlights
-Includes all necessary hardware to mount to your motorcycle
Our high flow injectors come in every Trask Turbo Kit and will support 250+ horsepower motors. If you are looking for high flow injectors for your big motor build, look no further. Designed to run 8.69 GPS and 30 degree spray pattern for better atomization, these injectors are an excellent addition to any big motor build. (V-Rod owners be aware you will need to run our billet fuel rail with these injectors).
These Trask sweat jackets are made to keep you warm on those cool days so you can ride in comfort and style.
Made using only the highest quality materials and sport ing the Trask Shield logo on the back, the left front chest, as well as TRASK down the right arm.
Available in Black and RED, in both pull over and Zip up styles
Designed for all six speed Harley-Davidson models, this billet cover is used to switch to a hydraulic clutch system or to give a custom look to your existing hydraulic setup. Proudly made in the USA at our Phoenix, AZ facility.
-Fits H-D 2006-Later Models with factory 6-Speed transmissions
-Comes with heavy duty bearing kit
-Available in black or chrome finishes
Indian Bro Bars +4
Indian Bro Bars +8
The Trask Indian Scout 2-1 exhaust brings classic vintage styling and provides all around performance gains through the power-band. This exhaust system is made from mandrel bent, high quality seamless steel piping. Every exhaust has built-in O2 bungs, and full heat shield coverage. Fully dyno developed and tested, this exhaust system produces nearly 98 horsepower and 74 ft/lbs torque on our stock test bike when combined with our high flow Trask air cleaner.
- Proudly made in the U.S.A.
- Available in Black on Black, Chrome, and Black/Chrome combination finish.
Our Powerflow filter is designed as a direct bolt in replacement for the very restrictive stock OEM Indian Scout air-box and filter. By simply bolting on this filter, you will see great improvements in airflow with no additional mapping or re-mapping required. Dyno developed and tested in house, the Powerflow filter will provide an instant increase of up to 7 additional horsepower & torque in the powerband. Made from only the highest quality materials, this filter is durable, washable, & reusable. TRASK POWERFLOW filters are designed to provide your motorcycle engine with excellent protection, that is made to last, while saving you money, and increasing your horsepower.
|Drag Part Number||1010-1967|
|Drag Part Number||1620-1644|
These Trask Indian Scout exhaust slip-ons provide added power and sound, while maintaining that classic vintage look. All without breaking the bank! Our slip-ons are made from high quality steel pipe.
- Proudly made in the U.S.A.
- Dyno tested and developed.
- Available for all Indian Scout models.
- Available in Chrome or Black finish.
Designed to enhance the look and feel of your Indian Scout right out of the box. Bolt-on and go!
- Proudly made in the USA at our Phoenix, AZ facility.
- made from seamless DOM mild steel.
- Available in your choice of Raw (ready for paint), Chrome or Black powder coated finish.
Note: All Trask handlebars are made to work with the OEM controls. Any use with aftermarket controls may require modification.