Shopping Cart

null
Assault-Box-website-banner
null

Assault Series Risers

$269.95

$269.95 Select options

Assault Series Risers

These risers are sure to complement the look of any bike they are bolted on. 

Derived using the same style and look from the Trask Assault Series custom bikes, these risers will provide a whole new dynamic to both the look and feel of your V-Twin Motorcycle. 

Beautify crafted and made in the USA these risers are sure to please. 

We even sourced out 12pt stainless steel bolts to compete the look to hold the top bar clamp place. 

Available in Chrome, Raw or Reverse Cut, these Risers are also available in two inch, four inch, six inch and eight inch, heights, as well as fitments for 1” and 1.25” diameter bars

Starting at $269.95

$269.95

$269.95 Select options

V-Line Chin Spoiler

$299.95

$299.95 Add to cart

V-Line Chin Spoiler

Introducing the New Trask V-Line Chin Spoiler. 

Like all V-Line products this New V-Line Chin Spoiler is designed to give your bike and nice clean, modern, updated, and sleek look.

The perfect addition for any build or upgrade.

Comes gel coated and with all necessary hardware for installation. 

$299.95

$299.95 Add to cart

V-Line FL Brake Pedal Pad

$105.95

$105.95 Select options

V-Line FL Brake Pedal Pad

Replace those boring and plain brake pedal pads on your FL with some clean, modern, and stylish Trask V-Line pedal pads

These V-Line FL brake pedal pads were designed as a direct replacement for the OEM H-D pedal pads.  

Easy to install and available in both Chrome and Reverse Cut these V-Line pedal pads will complement any bike they are bolted on.

 

$105.95

$105.95 Select options

V-Line Bag Latches 14+

$249.95

$249.95 Select options

V-Line Bag Latches 14+

These new updated V-line bag latches for 2014 and up Baggers are just what you need to give your bike a nice clean modern look.

Made from only the highest quality billet aluminum alloy and finished off utilizing only the highest quality finishes, these Trask V-Line bag latches will keep your bike looking good for years to come.

Available in both Chrome and Reverse Cut Finishes.

$249.95

$249.95 Select options

V-Line Brake Lever

$279.95

$279.95 Select options

V-Line Brake Lever

The Trask V-line Brake lever is the newest edition to the V-Line billet collection.

Designed to deliver that classic V-Line style and feel to your V-Twin H-D motorcycle.

Manufactured from only the highest quality materials and using only the finest coating’s, this brake lever is sure to look right at home on your H-D Bagger

Available in both Reverse Cut, and Chrome finishes 

V-Line Shift peg sold separately 

 

 

 

$279.95

$279.95 Select options

Typhoon Turbo Kit For Touring Models

$6,800.00

$6,800.00 Select options

Typhoon Turbo Kit For Touring Models

Introducing the TRASK TYPHOON Turbo Kits.

These new TRASK Turbo Kits offer a new hardcore and exacting look that

is sure to make a statement on any bike that has it installed.

With its two separate and tandem exhaust pipes that sweep side by side,

along the motor, cumulating to the dual billet exhaust tips, this Trask turbo

kit provides an unique and assured look.

The new TRASK TYPHOON Turbo Kit was designed to provide an

assured, yet elegant statement that would complement any bike that it was

bolted on.

TRASK TYPHOON kits are all business up front, that provides broad,

smooth, reliable, efficient, horsepower in back, ranging anywhere from

120HP to 300HP.

As always Trask turbo kits are 100% bolt on, and are designed to run on

premium pump gas with 8lbs of boost.

 

This system requires the use of a tuning module (not supplied). 

If you are looking for more we also offer engine upgrades and customs turbo systems so you can reach your desired level of performance.

Note: ALL KITS ARE CUSTOM BUILT ONCE ORDERED, NO COMPLETE KITS ARE KEPT IN  STOCK, ONCE YOU PLACE YOUR ORDER ALLOW FOR A BUILD TIME OF 2 TO 3 WEEKS.

$6,800.00

$6,800.00 Select options

Assault Turbo Kits for Touring Models

$6,600.00

$6,600.00 Select options

Assault Turbo Kits for Touring Models

Introducing the TRASK ASSAULT Turbo Kits.

These new TRASK Turbo Kits were originally designed and produced

exclusively for our ASSAULT Series Bikes.

ASSAULT kits were designed to give an aggressive, combative, and

militaristic look and feel to any bike, while providing us with the Monster

Power we desired to build into our ASSAULT series bikes

So now these exclusive kits are available as stand alone kits to be offered

along with all of our other turbo kits.

ASSAULT kits are capable of producing up to three hundred horsepower

and are available for a wide range of Harley-Davidson Bagger models

As always Trask turbo kits are 100% bolt on, and are designed to run on

premium pump gas with 8lbs of boost.

 

This system requires the use of a tuning module (not supplied). 

If you are looking for more we also offer engine upgrades and customs turbo systems so you can reach your desired level of performance.

Note: ALL KITS ARE CUSTOM BUILT ONCE ORDERED, NO COMPLETE KITS ARE KEPT IN  STOCK, ONCE YOU PLACE YOUR ORDER ALLOW FOR A BUILD TIME OF 2 TO 3 WEEKS.

$6,600.00

$6,600.00 Select options

Indian Scout PowerFlow Air Filter

$149.95

$149.95 Add to cart

Indian Scout PowerFlow Air Filter

This new TRASK POWERFLOW filter product is designed as a direct bolt in replacement for the very restrictive stock OEM Indian Scout air-box and filter.

The TRASK POWERFLOW filter greatly improves both the airflow and volumetric efficiency of the Indian Scout’s engine, by allowing it to scavenge as much air as possible to fill the cylinders.

Dyno developed and Dyno tested, this TRASK POWERFLOW filter will provide the Indian Scout an instant increase of up to seven additional horsepower and torque in the powerband, with no additional mapping or re-mapping required.

Made from only the best materials, consisting of high quality pliable rubber, four to six layers of cotton gauze, and epoxy-coated wire mesh, TRASK POWERFLOW filters are both durable, washable, and reusable.

TRASK POWERFLOW filters are designed to provide your motorcycle engine with excellent protection, that is made to last, while saving you money, and increasing your horsepower.

Indian-scout-dyno-powerflow-small

$149.95

$149.95 Add to cart

null

Trask Indian Scout Slip-Ons

$599.95

$599.95 Select options

Trask Indian Scout Slip-Ons

Providing improved  performance & sound through out the entire power-band, the new Trask Indian Scout slip-ons are just what you need to get some added power and performance out of your Scout while maintaining the classic vintage look.   
Dyno developed and Dyno tested these Trask slip-ons will provide you with some added power and sound without breaking the bank

Currently available for all Indian Scout models.

Trask slip-ons are made from high quality steel pipe, and come in your choice of either a high quality chrome finish or a Black ceramic coated finish. 

$599.95

$599.95 Select options

Trask Indian Scout 2-1 Exhaust

$899.95

$899.95 Select options

Trask Indian Scout 2-1 Exhaust

Available Now, the Trask Performance 2 into 1 Indian Scout exhaust system.

The new Trask Indian Scout 2-1 provides an all around performance gain through-out the entire power-band, this exhaust system will bring a classic vintage styling and look to your Indian Scout.
Dyno developed and Dyno tested this 2 into 1 Trask exhaust system produced just under 98 horsepower, and 74 foot pounds of torque on our stock test bike with our high flow Trask air filter.

 

The Trask 2 into 1 Indian Scout exhaust system is made from high quality seamless steel pipe, that is mandrel bent. Every exhaust has O2 bungs built in, along with full heat shield coverage, and your choice of either a high quality Chrome finish,  Black ceramic coated finish or a Black/Chrome combination finish to complete the look, that will complement your Indian Scout.

$899.95

$899.95 Select options

SpeedGlide Complete RearEnd Kit

$2,600.00

$2,600.00 Add to cart

SpeedGlide Complete RearEnd Kit

Trask SpeedGlide Complete RearEnd Kit

Made out of only the highest quality composite materials.

These Trask SpeedGlide bags are built to last and will provide any 09 and Later FL Harley-Davidson with a truly unique and custom built look.

This kit comes complete with the SpeedGlide Rear Fender , Both Left and Right Bags, Side Covers, Trim and all mounting hardware and instructions. 

Bags do not come with Number Plate Pictured,  license plate frame or custom lighting, and uses your factory bag lids. 

$2,600.00

$2,600.00 Add to cart

Indian Scout V-Line Handle Bars

$279.95

$279.95 Select options

Indian Scout V-Line Handle Bars

These V-line handlebars are made from seamless DOM mild steel.

Designed as a direct bolt-on replacement these handle bars were designed to enhance both the look and feel of your Indian Scout.

Available in your choice of raw ready for paint, chrome or black powder coated finish.

 

Note: All Trask handlebars are made to work with the OEM controls. Any use with aftermarket controls may require modification.

$279.95

$279.95 Select options

Get Your Monster Power On!
Shop For Turbo Kits
Click Here
week-spec-banner
dealer-locate-banner
drag
wallpaper2